Characteristics
1. Its cure time is so short that Sunstar Penguin Cyanoace E-5000 reaches perfect adhesion within only 3 to 90 seconds.
2. Sunstar Penguin Cyanoace E-5000 is a one part type adhesive, so there is no need to mix hardener.
3. Sunstar Penguin Cyanoace E-5000 does not need to heated for curing; cures easily at room temperature.
4. Being a non-solvent type adhesive, there is no need to spare time to dry solvent.
5. Neither drying nor pressing is needed. Just press lightly with hand and superior adhesion can be gained.
6. As shows low viscosity and good elongation, required application amount of Sunstar Penguin Cyanoace E-5000 is only half of one ordinary adhesive.
7. Finish of adhered surface is transparent and very beautiful.

Application
1. Clean the adhered surface by removing dirt, dust, oil, rust and etc.
2. Apply a small quantity of Sunstar Penguin Cyanoace E-5000 to the adhered surface.
3. Rub the adhered materials together and fix them so that Sunstar Penguin Cyanoace E-5000 can spread evenly.
4. The thinner it is spread, the sooner Sunstar Penguin Cyanoace E-5000 cures with stronger adhesion. The quicker the adhered materials are rubbed together after application, the stronger the adhesive will become.
5. Sunstar Penguin Cyanoace E-5000 cures within 10 to 90 seconds. (variation in figure is according to the kinds of adhered materials or their surface condition).
6. This superior adhesive reaches practical strength within 30 to 120 minutes at room tempature.
7. Sunstar Penguin Cyanoace E-5000 is available for almost all kinds of material except polyethylene, polypropylene, silicone and fluoride resin.

Packaging
20g bottle