Product Code: RSB-600124

Rite Lok PR-600 is a medium-high viscosity Ethyl Cyanoacrylate adhesive. PR-600 is formulated for high speed, high strength bonding of plastics and rubbers. Rite Lok PR-600 is specially formulated for the bonding of most plastics and rubbers, but will also bond other common substrates. Recommended for use on close-fitting parts and fairly smooth, even surfaces. Rite Lok PR-600 does however provide some moderate gap-filling capabilty.

Cure speed vs enviromental conditions
Cyanoacrylate adhesives require surface moisture on the substrates in order to initiate the curing mechanism. The speed of cure is reduces in low-humidity conditions. Low temperatures will also reduce cure speed. All figures relating to cure speed are tested at 21 degree celsius.


Applications
- Bond speed is very fast so ensure that parts are properly aligned before bonding.

- Ensure parts are clean, dry and free from oil and grease.

- Product is normally hand applied from the bottle. Apply sparingly to one surface and press parts firmly together until handing strength is achieved. As general rule, as little cyanoacrylate as possible should be used - over application will result in slow cure speed and lower bond strength.